Print

SITRANS LH100

sitrans lh100SITRANS LH100

Description

The SITRANS LH100 series pressure transmitter converts the level-proportional hydrostatic pressure into a standardized signal 4 to 20 mA. The transmitter consists of a stainless steel housing (Ø 23,4 mm) with mechanical protection IP 68, a piezo-resistive sensor with ceramic diaphragm. The transmitter cable has a diameter of Ø 6 mm and also contains a vent pipe for connection to the atmosphere.

 

Detail

Accuracy 0,3%
Long-Term stability 0,25%/12 months
Measuring range 0 – 4 mH2O (0 – 13,2 ftH2O) to 0 - 20m H2O (0 – 66 ftH2O)

 

Benefits

  • Compact design
  • Corrosion resistant material
  • housing: stainless steel 316L
  • cable: sheath made of PE
  • cable length: standard 10, 20 or 30 m, special length up to 50 m possible
  • Explosion protected version acc. ATEX II 1 G Ex ia IIC T4 Ga and IEC Ex Ex ia IIC T4 Ga available

Standard measuring set:

  • Transmitter
  • Cable hanger
  • Junction box

Print

SITRANS P MPS

sitrans p mpsSITRANS P MPS

Description

The SITRANS P MPS series pressure transmitter converts the level-proportional hydrostatic pressure into a standardized signal 4 to 20 mA. The transmitter consists of a stainless steel housing (Ø 27 mm) with mechanical protection IP 68, a piezzo-resistive sensor with stainless steel diaphragm and Φ 8.3 mm 2-wire sheathed cable with a built-in 2 air vents and a Kevlar cord vital for longer cable support.

Detail

Accuracy ≤ 0,3%
Long-Term stability ≤ 0,2%/12 months
Measuring range 0 - 2 mH2O (0 - 6,6 ftH2O) to 
0 - 20 mH2O (0 - 66 ftH2O)

Benefits

  • Compact design
  • Carefully selected material
    - housing: stainless steel 1.4571 (316 Ti)
    - cable: PE/HFFR sheath (non-halogen)
  • Cable length: 
    - standard: 10 and 25m 
    - on request: no limit - according to customers' need
  • Explosion protection certificate - ATEX II 1 G EEx ia IIC T4

Standard measuring set:

  • Transmitter
  • Cable hanger
  • Junction box

Print

SITRANS P200/P210/P220

sitrans p200 p210 p220SITRANS P200/P210/P220

Description

The SITRANS transmitters P200, P210 and P220 are compact single-range-transmitters for measurement of absolute and gauge pressure.
In this series we use two different kinds of pressure sensors: two stainless steel sensors and one ceramics sensor. So the measurement of process pressure, absolute pressure and hydrostatic pressure is an easy thing. The measured pressure will be transformed with these sensors into a 4…20-mA- resp. a 0…10-V-signal.

 

Detail

Nonlinearity ≤ 0,25 %
Long-term stability ≤ 0,25% / 12 Monate
Measuring range
 
SITRANS P200: 1 bar to 60 bar gauge
                          0,6 bar to 16 bar absolute
SITRANS P210: 100 mbar to 600 mbar gauge
SITRANS P220: 2,5 bar to 600 bar gauge

 

Benefits

  • High measuring accuracy
  • Rugged stainless steel enclosure
  • High overload withstand capability
  • For aggressive and non-aggressive media
  • For measuring the pressure of liquids, gases and vapors
  • Compact design



Print

SITRANS P280

sitrans p280SITRANS P280

WirelessHART pressure transmitter

Description

The SITRANS P280 is a WirelessHART pressure transmitter that provides all measured process values as well as diagnostic information, parameters and functions via radio. The device is powered by an internal battery and designed for ultralow power consumption. The compact and rugged design makes it specially suitable for direct mounting on tanks and pipes in remote parts of plants, and on moving or rotating equipment for process monitoring or asset management applications.

 

Detail

Accuracy ± 0.25 % of full scale;
max. +/- 0.25 % of sensor's span
Long-Term Stability ≤ 0.25 % / 12 months
Measuring range 0 - 1.6 bar (0 - 23 psi) ...0 - 320 bar (0 - 4641 psi)

 

Benefits

  • Various pressure ranges available (1.6, 10, 50, 200, 320 bar; 23, 145, 725, 2900, 4641 psi).
  • LCD display with functional display items and icons, English and German display selectable
  • Practical push buttons: Three push buttons for maximum efficiency for setup, diagnostics, communication and security settings with no additional devices or tools
  • Maintenance-friendly backlight function
  • Sleep mode for efficient battery life management
  • Battery status display on LCD and in network overview
  • Precise measurement accuracy for more productivity
  • 90 and 180 degree display turnable
  • Configurable with standard tools supporting EDD – e. g. with SIMATIC PDM
  • Physical HART maintenance port for commissioning

 

Print

SITRANS P300

sitrans p300SITRANS P300

Description

The SITRANS P 300 offers the measuring precision and ruggedness already known from the SITRANS P DSIII.
Its stainless steel housing with laser-printed nameplate, together with a wide range of hygienic process connections, mean that it is highly suitable for use in the food & beverages industry as well as for pharmaceutical processes.
With a maximum deviation in measurement of 0.075% and the proven operating philosophy, it fits seamlessly into the SITRANS P family.

 

Detail

Accuracy ≤ 0,075%
Long term stability ≤ 0.25% / 60 months
Measuring range 0 - 10 mbar (0 - 4 inchH2O) to 
0 - 400 bar (0 - 5800 psi)

 

Benefits

  • With hygiene (EHEDG, 3A), material and calibration certificates eminently suited to the food and beverage and pharmaceutical industry
  • Especially suitable for degrees of protection to IP68 and IP69K, CIP/SIP cleaning, and high-viscosity measuring process
  • Measurement cells for gauge and absolute pressure
  • Measurement cells with flush mounted diaphragm
  • Extended simulations and diagnostic functions Parameters can easy set via three local push buttons and LCD display, HART or PROFIBUS PA profile 3.0 communication.




Main Menu

Main Menu